642-746 真题

北风留影

　　CiscoImplementing Cisco Unified Wireless Mobility Services认证作为全球IT领域专家Cisco热门认证之一，是许多大中IT企业选择人才标准的必备条件。 如果你正在准备642-746考试，CiscoImplementing Cisco Unified Wireless Mobility Services认证做最后冲刺，又苦于没有绝对权威的考试真题模拟，PassQuick可以帮助您通过考试。
　　642-746 认证题库
Implementing Cisco Unified Wireless Mobility Services
科目编号 : 642-746
题库名称 : Implementing Cisco Unified Wireless Mobility Services
考题数目 : 90 Q&As
更新时间: 2009-12-12
时间： 90分钟（50-60 questions）
现有语言版本： 英语
在642-746 IUWMS实施思科统一无线移动服务考试与CCNP无线认证相关的考试。这门考试评估候选人的能力，融入无线移动服务，来调整和故障排除的无线局域网，并执行室内的企业网状网络。考生可准备这次考试通过采取IUWMS实施思科统一无线移动服务的过程中!
CCNP认证介绍：
     CCNP认证（思科认证网络专业人员）表示通过认证的人员具有丰富的网络知识。获得CCNP认证的专业人员可以为具有100到500多个节点的大型企业网络安装、配置和运行LAN、WAN和拔号访问业务。他们可以使用的协议包括（但不限于）：IP, IGRP, IPX, Async Routing, AppleTalk, Extended Access Lists, IP RIP, Route Redistribution,RIP, Route Summarization, OSPF, VLSM, BGP, Serial, Frame Relay, ISDN, ISL, X.25, DDR, PSTN, PPP, VLAN, Ethernet, Access Lists, 802.10, FDDI, Transparent 和Translational Bridging.
      CCNP处于思科认证层次中的第二层，她是在CCNA的基础之上的一项思科职业资格认证，获得CCNP资格的专业人员将具有100到500多个节点的大型企业网络安装、配置和运行LAN、WAN及拔号访问业务的能力。
    CCNP分为四大块：
    1.路由和交换
    2.广域网交换
    3.远程访问
    4.纠错
CCNP认证，满足了无线设计的需要，实施和运行思科无线网络和移动基础设施。 CCNP认证强调无线无线网络的原则和理论。它还承认的专业知识和专业的无线谁可以评估和转化，反过来，我们也将成功安装纳入网络业务技术规范要求的技术头脑。
Passquick提供有642-746 考试的学习材料，如考题，Cisco 642-746 学习指南， Cisco 642-746 考试的问题与答案， Cisco 642-746 培训，Cisco 642-746 免费试用等。此外我们PassQuick还提供有CCNP 题库，CCNA 题库，MCSE 题库等大量的专业题库！
　　真题如下：1. What is the default role on a Cisco mesh access point?
A. root access point
B. mesh access point
C. root bridge access point
D. workgroup bridge
Answer: B
　　2. Which AP combinations can support MAP or RAP roles in a mesh network using version 5.2?
A. AP1252, AP1510, AP1522, AP1524
B. AP1232, AP1522, AP1524, AP1242
C. AP1131, AP1522, AP1242, AP1524
D. AP1252, AP 1522, AP1524, AP1242
Answer: C
　　3. Where is Ethernet bridged traffic terminated in a mesh network?
A. WLC
B. WGB
C. MAP
D. RAP
Answer: D
　　4. Which two frequencies can be used for backhaul in a mesh solution using version 5.2? (Choose two.)
A. 2.4 GHz
B. 4.2 GHz
C. 4.9 GHz
D. 5.8 GHz
Answer: CD
　　5. What is the Cisco recommendation for maximum hop count and VLANs per sector in a mesh deployment?
A. 4 hops, 10 VLANs
B. 4 hops, 16 VLANs
C. 5 hops, 10 VLANs
D. 6 hops, 16 VLANs
Answer: B
　　6. What is the first step to initially establish a mesh network?
A. Configure the bridge group name.
B. Enter the MAC address of the mesh access point on the Cisco WLC.
C. Enable Ethernet bridging.
D. Enable VLAN tagging.
Answer: B
　　7. AWPP utilizes which three parameters to determine the optimal path? (Choose three.)
A. best parent selection
B. bridge group name
C. ease value
D. hop count
E. parent selection
F. signal-to-noise ratio
Answer: CDF
　　8. What is the radio role of an AP1410?
A. repeater
B. root bridge
C. root bridge with clients
D. workgroup bridge
Answer: B
　　9. Which radio role is available on the AP1310 but not on the AP1242?
A. install mode
B. non-root bridge
C. repeater
D. root bridge
Answer: A
　　10. The Cisco recommended best practice for RSSI-based device tracking states that the tracked devices must be reliably detected by a minimum of how many APs?
A. one
B. two
C. three
D. four
Answer: C