深入redis内部--事件处理机制

_N_了吧唧的_

　　1. redis事件的定义



/* State of an event based program */
typedef struct aeEventLoop {
int maxfd;   /* highest file descriptor currently registered */
int setsize; /* max number of file descriptors tracked */
long long timeEventNextId; /*下一个定时器的id*/
time_t lastTime;     /* Used to detect system clock skew */
aeFileEvent *events; /* Registered events注册的文件事件  */
aeFiredEvent *fired; /* Fired events 已注销的文件事件 */
aeTimeEvent *timeEventHead;  /*定时器事件链表的首部*/
    int stop;
    void *apidata; /* This is used for polling API specific data */
    aeBeforeSleepProc *beforesleep;
    } aeEventLoop;
　　1.1 事件定义




　　/* File event structure */
typedef struct aeFileEvent {
    int mask; /* one of AE_(READABLE|WRITABLE) */
    aeFileProc *rfileProc;
    aeFileProc *wfileProc;
    void *clientData;
} aeFileEvent;


　　/* Time event structure */
typedef struct aeTimeEvent {
    long long id; /* time event identifier. */
    long when_sec; /* seconds */
    long when_ms; /* milliseconds */
    aeTimeProc *timeProc;
    aeEventFinalizerProc *finalizerProc;
    void *clientData;
    struct aeTimeEvent *next;
} aeTimeEvent;


　　/* A fired event */
typedef struct aeFiredEvent {
    int fd;
    int mask;
} aeFiredEvent;


　　2.封装事件处理的实现



/* Include the best multiplexing layer supported by this system.
* The following should be ordered by performances, descending. */
#ifdef HAVE_EVPORT
#include "ae_evport.c"
#else
#ifdef HAVE_EPOLL
#include "ae_epoll.c"
#else
#ifdef HAVE_KQUEUE
#include "ae_kqueue.c"
#else
#include "ae_select.c"
#endif
#endif
#endif
　　3.事件处理的主函数



void aeMain(aeEventLoop *eventLoop) {
eventLoop->stop = 0;
while (!eventLoop->stop) {
if (eventLoop->beforesleep != NULL)
eventLoop->beforesleep(eventLoop);
aeProcessEvents(eventLoop, AE_ALL_EVENTS);
}
}
　　3.1事件处理过程



/* Process every pending time event, then every pending file event
* (that may be registered by time event callbacks just processed).
* Without special flags the function sleeps until some file event
* fires, or when the next time event occurs (if any).
*
* If flags is 0, the function does nothing and returns.
* if flags has AE_ALL_EVENTS set, all the kind of events are processed.
* if flags has AE_FILE_EVENTS set, file events are processed.
* if flags has AE_TIME_EVENTS set, time events are processed.
* if flags has AE_DONT_WAIT set the function returns ASAP until all
* the events that's possible to process without to wait are processed.
*
* The function returns the number of events processed. */
int aeProcessEvents(aeEventLoop *eventLoop, int flags)
{
int processed = 0, numevents;
/* Nothing to do? return ASAP */
if (!(flags & AE_TIME_EVENTS) && !(flags & AE_FILE_EVENTS)) return 0;
/* Note that we want call select() even if there are no
* file events to process as long as we want to process time
* events, in order to sleep until the next time event is ready
* to fire. */
if (eventLoop->maxfd != -1 ||
((flags & AE_TIME_EVENTS) && !(flags & AE_DONT_WAIT))) {
int j;
aeTimeEvent *shortest = NULL;
struct timeval tv, *tvp;
if (flags & AE_TIME_EVENTS && !(flags & AE_DONT_WAIT))
shortest = aeSearchNearestTimer(eventLoop);
if (shortest) {
long now_sec, now_ms;
/* Calculate the time missing for the nearest
* timer to fire. */
aeGetTime(&now_sec, &now_ms);
tvp = &tv;
tvp->tv_sec = shortest->when_sec - now_sec;
if (shortest->when_ms < now_ms) {
tvp->tv_usec = ((shortest->when_ms+1000) - now_ms)*1000;
tvp->tv_sec --;
} else {
tvp->tv_usec = (shortest->when_ms - now_ms)*1000;
}
if (tvp->tv_sec < 0) tvp->tv_sec = 0;
if (tvp->tv_usec < 0) tvp->tv_usec = 0;
} else {
/* If we have to check for events but need to return
* ASAP because of AE_DONT_WAIT we need to set the timeout
* to zero */
if (flags & AE_DONT_WAIT) {
tv.tv_sec = tv.tv_usec = 0;
tvp = &tv;
} else {
/* Otherwise we can block */
tvp = NULL; /* wait forever */
}
}
numevents = aeApiPoll(eventLoop, tvp);
for (j = 0; j < numevents; j++) {
aeFileEvent *fe = &eventLoop->events[eventLoop->fired[j].fd];
int mask = eventLoop->fired[j].mask;
int fd = eventLoop->fired[j].fd;
int rfired = 0;
/* note the fe->mask & mask & ... code: maybe an already processed
* event removed an element that fired and we still didn't
* processed, so we check if the event is still valid. */
if (fe->mask & mask & AE_READABLE) {
rfired = 1;
fe->rfileProc(eventLoop,fd,fe->clientData,mask);
}
if (fe->mask & mask & AE_WRITABLE) {
if (!rfired || fe->wfileProc != fe->rfileProc)
fe->wfileProc(eventLoop,fd,fe->clientData,mask);
}
processed++;
}
}
/* Check time events */
if (flags & AE_TIME_EVENTS)
processed += processTimeEvents(eventLoop);
return processed; /* return the number of processed file/time events */
}


/* Process time events */
static int processTimeEvents(aeEventLoop *eventLoop) {
int processed = 0;
aeTimeEvent *te;
long long maxId;
time_t now = time(NULL);
/* If the system clock is moved to the future, and then set back to the
* right value, time events may be delayed in a random way. Often this
* means that scheduled operations will not be performed soon enough.
*
* Here we try to detect system clock skews, and force all the time
* events to be processed ASAP when this happens: the idea is that
* processing events earlier is less dangerous than delaying them
* indefinitely, and practice suggests it is. */
if (now < eventLoop->lastTime) {
te = eventLoop->timeEventHead;
while(te) {
te->when_sec = 0;
te = te->next;
}
}
eventLoop->lastTime = now;
te = eventLoop->timeEventHead;
maxId = eventLoop->timeEventNextId-1;
while(te) {
long now_sec, now_ms;
long long id;
if (te->id > maxId) {
te = te->next;
continue;
}
aeGetTime(&now_sec, &now_ms);
if (now_sec > te->when_sec ||
(now_sec == te->when_sec && now_ms >= te->when_ms))
{
int retval;
id = te->id;
retval = te->timeProc(eventLoop, id, te->clientData);
processed++;
/* After an event is processed our time event list may
* no longer be the same, so we restart from head.
* Still we make sure to don't process events registered
* by event handlers itself in order to don't loop forever.
* To do so we saved the max ID we want to handle.
*
* FUTURE OPTIMIZATIONS:
* Note that this is NOT great algorithmically. Redis uses
* a single time event so it's not a problem but the right
* way to do this is to add the new elements on head, and
* to flag deleted elements in a special way for later
* deletion (putting references to the nodes to delete into
* another linked list). */
if (retval != AE_NOMORE) {
aeAddMillisecondsToNow(retval,&te->when_sec,&te->when_ms);
} else {
aeDeleteTimeEvent(eventLoop, id);
}
te = eventLoop->timeEventHead;
} else {
te = te->next;
}
}
return processed;
}