cisco asa 5520 8.4 NAT转换配置
1)定义nat转换规则 object network 192.168.3.233_18096 #定义网络对象名 host 192.168.3.233 #定义内网IP nat (dmz,outside) static xxx.17.xxx.36 service tcp 18096 18096 #转换规则,把内网主机192.168.3.233映射到外网xxx.17.xxx.36. 2)定义访问列表 方式一 access-list outside_access_in_1 extended permit tcp any object 192.168.3.233_18096 eq 18096 #注意:目的地址为定义的NAT对象. 方式二
a. object service tcp_18096_acl #定义服务对象 service tcp source range 1 65535 destination eq 18096 #源端口任意端口,目的端口 #为18096 b. access-list outside_access_in_1 extended permit
object tcp_18096_acl any object 192.168.3.233_18096 4)应用访问列表 access-group outside_access_in_1 in interface outside
----------------------------------------------------------- 如下是8.4版官方配置示例: Configuration Examples for Permitting or Denying Network Access
This section includes typical configuration examples for permitting or denying network access.
The following example adds a network object for inside server 1, performs static NAT for the server, and enables access to from the outside for inside server 1.
hostname(config)# object network inside-server1 hostname(config)# host 10.1.1.1 hostname(config)# nat (inside,outside) static 209.165.201.12 hostname(config)# access-list outside_access extended permit tcp any object inside-server1 eq www hostname(config)# access-group outside_access in interface outside
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/access_rules.html
|