redis 负载均衡 集群配置

踏雪寻梅

　　redis 官网 http://redis.io/
　　中文网站 http://redis.cn/
　　谷歌代码的redis项目 https://code.google.com/p/redis/
　　http://www.oschina.net/p/redis/
　　在oschina.net的介绍：



Redis 是一个高性能的key-value数据库。 redis的出现，很大程度补偿了memcached这类keyvalue存储的不足，在部 分场合可以对关系数据库起到很好的补充作用。它提供了Python，Ruby，Erlang，PHP客户端，使用很方便。
性能测试结果：
SET操作每秒钟 110000 次，GET操作每秒钟 81000 次，服务器配置如下：
Linux 2.6, Xeon X3320 2.5Ghz.
stackoverflow 网站使用 Redis 做为缓存服务器。
　　我要做的事情就是，在多台linux服务器中，部署redis，由于redis的集群功能没有完全编写好，见：http://redis.io/topics/cluster-spec
　　目前 redis的最新版本是：redis-2.6.13.tar.gz
　　但是redis可以做一个主从复制的设置，见redis.conf的 复制【REPLICATION】 部分注释和设置





################################# REPLICATION #################################
# Master-Slave replication. Use slaveof to make a Redis instance a copy of
# another Redis server. Note that the configuration is local to the slave
# so for example it is possible to configure the slave to save the DB with a
# different interval, or to listen to another port, and so on.
#
# slaveof  
# If the master is password protected (using the "requirepass" configuration
# directive below) it is possible to tell the slave to authenticate before
# starting the replication synchronization process, otherwise the master will
# refuse the slave request.
#
# masterauth
# When a slave loses its connection with the master, or when the replication
# is still in progress, the slave can act in two different ways:
#
# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
#    still reply to client requests, possibly with out of date data, or the
#    data set may just be empty if this is the first synchronization.
#
# 2) if slave-serve-stale-data is set to 'no' the slave will reply with
#    an error "SYNC with master in progress" to all the kind of commands
#    but to INFO and SLAVEOF.
#
slave-serve-stale-data yes
# You can configure a slave instance to accept writes or not. Writing against
# a slave instance may be useful to store some ephemeral data (because data
# written on a slave will be easily deleted after resync with the master) but
# may also cause problems if clients are writing to it because of a
# misconfiguration.
#
# Since Redis 2.6 by default slaves are read-only.
#
# Note: read only slaves are not designed to be exposed to untrusted clients
# on the internet. It's just a protection layer against misuse of the instance.
# Still a read only slave exports by default all the administrative commands
# such as CONFIG, DEBUG, and so forth. To a limited extend you can improve
# security of read only slaves using 'rename-command' to shadow all the
# administrative / dangerous commands.
slave-read-only yes
# Slaves send PINGs to server in a predefined interval. It's possible to change
# this interval with the repl_ping_slave_period option. The default value is 10
# seconds.
#
# repl-ping-slave-period 10
# The following option sets a timeout for both Bulk transfer I/O timeout and
# master data or ping response timeout. The default value is 60 seconds.
#
# It is important to make sure that this value is greater than the value
# specified for repl-ping-slave-period otherwise a timeout will be detected
# every time there is low traffic between the master and the slave.
#
# repl-timeout 60
# Disable TCP_NODELAY on the slave socket after SYNC?
#
# If you select "yes" Redis will use a smaller number of TCP packets and
# less bandwidth to send data to slaves. But this can add a delay for
# the data to appear on the slave side, up to 40 milliseconds with
# Linux kernels using a default configuration.
#
# If you select "no" the delay for data to appear on the slave side will
# be reduced but more bandwidth will be used for replication.
#
# By default we optimize for low latency, but in very high traffic conditions
# or when the master and slaves are many hops away, turning this to "yes" may
# be a good idea.
repl-disable-tcp-nodelay no
# The slave priority is an integer number published by Redis in the INFO output.
# It is used by Redis Sentinel in order to select a slave to promote into a
# master if the master is no longer working correctly.
# A slave with a low priority number is considered better for promotion, so
# for instance if there are three slaves with priority 10, 100, 25 Sentinel will
# pick the one wtih priority 10, that is the lowest.
#
# However a special priority of 0 marks the slave as not able to perform the
# role of master, so a slave with priority of 0 will never be selected by
# Redis Sentinel for promotion.
#
# By default the priority is 100.
slave-priority 100
View Code 　　看了上面的默认配置，其实也很容易理解，修改下就可以配置主从复制了，有 slaveof   ，就成了 从服务器 ，没有就是 主服务器。
　　还有 主服务器 安全的设置





################################## SECURITY ###################################
# Require clients to issue AUTH  before processing any other
# commands.  This might be useful in environments in which you do not trust
# others with access to the host running redis-server.
#
# This should stay commented out for backward compatibility and because most
# people do not need auth (e.g. they run their own servers).
#
# Warning: since Redis is pretty fast an outside user can try up to
# 150k passwords per second against a good box. This means that you should
# use a very strong password otherwise it will be very easy to break.
#
# requirepass foobared
# Command renaming.
#
# It is possible to change the name of dangerous commands in a shared
# environment. For instance the CONFIG command may be renamed into something
# hard to guess so that it will still be available for internal-use tools
# but not available for general clients.
#
# Example:
#
# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
#
# It is also possible to completely kill a command by renaming it into
# an empty string:
#
# rename-command CONFIG ""
#
# Please note that changing the name of commands that are logged into the
# AOF file or transmitted to slaves may cause problems.
View Code 　　
　　对了，redis的编译安装非常简单，下载redis-2.6.13.tar.gz后，
　　tar xvf redis-2.6.13.tar.gz
　　cd redis-2.6.13
　　make && make install
　　将会把redis-server、redis-cli、redis-benchmark、redis-check-aof、redis-check-dump 五个文件复制到 /usr/local/bin/下



[iyunv@localhost ~]# ll /usr/local/bin
总用量 12464
-rwxr-xr-x. 1 root root 3853805 6月  18 18:54 redis-benchmark
-rwxr-xr-x. 1 root root   16459 6月  18 18:54 redis-check-aof
-rwxr-xr-x. 1 root root   37707 6月  18 18:54 redis-check-dump
-rwxr-xr-x. 1 root root 3909826 6月  18 18:54 redis-cli
-rwxr-xr-x. 1 root root 4931736 6月  18 18:54 redis-server
[iyunv@localhost ~]#
　　然后将源码中的 redis.conf 复制到 /etc/redis.conf
　　再制作一个 init.d 的启动脚本：



#!/usr/bin/env bash
#
# redis start up the redis server daemon
#
# chkconfig: 345 99 99
# description: redis service in /etc/init.d/redis \
#             chkconfig --add redis or chkconfig --list redis \
#             service redis start  or  service redis stop
# processname: redis-server
# config: /etc/redis.conf

PATH=/usr/local/bin:/sbin:/usr/bin:/bin
REDISPORT=6379
EXEC=/usr/local/bin/redis-server
REDIS_CLI=/usr/local/bin/redis-cli
PIDFILE=/var/run/redis.pid
CONF="/etc/redis.conf"
#make sure some dir exist
if [ ! -d /var/lib/redis ] ;then
mkdir -p /var/lib/redis
mkdir -p /var/log/redis
fi
case "$1" in
status)
ps -A|grep redis
;;
start)
if [ -f $PIDFILE ]
then
echo "$PIDFILE exists, process is already running or crashed"
else
echo "Starting Redis server..."
$EXEC $CONF
fi
if [ "$?"="0" ]
then
echo "Redis is running..."
fi
;;
stop)
if [ ! -f $PIDFILE ]
then
echo "$PIDFILE does not exist, process is not running"
else
PID=$(cat $PIDFILE)
echo "Stopping ..."
$REDIS_CLI -p $REDISPORT SHUTDOWN
while [ -x ${PIDFILE} ]
do
echo "Waiting for Redis to shutdown ..."
sleep 1
done
echo "Redis stopped"
fi
;;
restart|force-reload)
${0} stop
${0} start
;;
*)
echo "Usage: /etc/init.d/redis {start|stop|restart|force-reload}" >&2
exit 1
esac
　　将上面内容复制到 /etc/init.d/redis
　　chkconfig --add redis
　　chkconfig --list redis
　　service redis start
　　开启了服务，对了忘记了 /etc/redis.conf里面可以把  daemonize no 修改为



daemonize yes
　　就可以默认在后台执行redis-server了。
　　这就是主服务器，从服务器，配置一样，只不过 修改/etc/redis.conf 中



slaveof  6379
　　然后开启从服务器的redis服务。
　　
　　测试



#主服务器
redis-cli -p 6379 set hello world
#从服务器

redis-cli -p 6379 get hello
"world"
#主服务器
redis-cli -p 6379 set hello world2
#从服务器

redis-cli -p 6379 get hello
"world2"
redis-cli -p 6379 set hello world
(error) READONLY You can't write against a read only slave.
#成功 配置主从redis 服务器。好简单啊。
　　由于配置中有一条 从服务器 是只读的，所以从服务器 没法设置数据，只可以读取数据。